We have some very exciting after market products already available or in the pipeline to come very soon, with specifically the hugely popular Minelab Equinox in mind for starters to improve and try and make it an even better user friendly detector.
Products to fit other Metal Detectors will follow.
We will be endeavoring to keep prices sensible on these products. The Tele-Knox Telescopic Carbon Fibre 3 piece replacement stem for the Minelab Equinox models for instance has cost us a huge amount of Dollars having special moulds made rather than going the 3D printing route. 5 special moulds for parts including even one for making an alternative coil bolt washer similar to the CTX one, this is without the dozen or more moulds simply for making the tubes, all have cost a small fortune.
The Telescopic stem has been designed with travel and transportation in mind. Scotty Ellis designed the 3 piece stem to close in to a maximum of 24". When fully open its 52". We made a mould that enables the control box to slide on the stem to wherever suits the user. There is an anti- rotational channel now moulded running the whole length of the stem that increases the strength of things and also makes it impossible to twist the stem sideways. Stem locks and also the Control box are slotted into this channel also. We have redesigned the coil fixing point on the lower stem to include a new round CTX style coil bolt washer, hopefully this might stop the over tightening of the coil bolts that can happen.
The new glueless stem clamps that we are now incorporating on the Tele-Knox have an adjustable thumbscrew and screw tightener that are both adjustable.
Finally we are offering 6 coloured Carbon Fibre options, including a new pink option for the ladies.
Colours on the 3 piece and the S. stems available are
Red/black carbon, Black/grey carbon, Dark Blue, Light sky blue, Woodland Camo and Pink which is only available on the 3 piece.
Colours available on the two piece stems are Red/black carbon, Black/grey carbon and finally woodland camo.
Both the 3 piece and the S Stem can be altered to include a 4" longer tall boy lower stem in all the colours to replace the shorter standard stem for those over 6' 1" at no extra charge. Please message if you require this when ordering.
We have recently added an adapter kit for the Minelab Vanquish models to enable them to be fitted to all models of our Tele-Knox.
STOP PRESS
Scotty Ellis has been busy in designer mode again.
His very latest Ideas that will shortly be available to complement the Minelab Equinoxand Vanquish models will be a purpose made Injection moulded base for the Control boxes to enable them to fold backwards for transport. This base fitting can be adjusted simply by changing two plastic screws to fit either our Tele-Knox shaft or any shaft of the same diameter even the standard Minelab one.
As if this wasnt exciting enough and badly needed we are having a purpose made metal armcup added to our products to fit the Nox. This metal armcup will incorporate a bottle opener one side and a fitting purpose made to draw a probe through to clean the mud off.
Both these items hopefully will be ready before christmas this year and will be offered singly or as a two part kit packaged together. Prices will be very keen, hopefully cheaper than alternative 3D printed options.
